Corrosion badge customization, do you know how to make it?

Friends, do you know how to make the corrosion badge? Corrosion metal badges are not the same as other badges such as baking paint and bite plates during the production process. It does not need to go to additional graphics molds. After the badge image is designed, it is directly converted into film floor, through the Western version of the exposure technology , Transfer the graphics of the bottom card to the copper plate, stainless steel plate, iron plate or aluminum plate. It saves the cost of badge making and mold opening, and greatly saves the cost of badge making. The following editors will share with you the process of making the corrosion badge: 1. After transferring the pattern to the material, corrode the figure on the material. 2. After transferring the graphics to the material, then use wax to protect the places that do not need to be processed. The places that need to be processed will be protected according to the requirements, and then the chemicals will be poured to corrode the graphics. 3. Rinse after the corrosion is completed, and remove the covering wax film by heating. 4. Carry out polishing, use a polishing machine to polish it, so that the protruding part of the badge looks bright and shows a strong metal texture. 5. Packing the finished corrosion badges, special packaging such as brocade boxes and flannel boxes can be used according to customer requirements. The lines made by the Corrosion Badge according to the design plan are very beautiful.